NZ Freephone: 0800 551 201

Phone: 03 543 9030

Fax: 03 541 0787

Email: rubbertrack@mainlinecom.co.nz

Website: http://www.mainlinetrack.co.nz

 

See our range of Hitches & Buckets we have available. Call or email us today.

$1,250 + GST

PC40 - Quick Hitch

  This wedge lock hitch is designed to fit a Komatsu PC40MR-2 excavator but may fit other sub models.  This hitch needs a bit of a tidy up but is priced to sell. Read more >>

$3,900 + GST

R160LC - HYD HITCH

  This brand new JB hydraulic hitch is designed for an Hyundai R160LC.  See dimensions to see if it fits your excavator.  This is a sound tidy hitch and is priced for a quick sale.   *Pin Centres* 410mm ... Read more >>

$275 + GST / Each

Steel Wraps - Cleaning Buckets

  Sizes:  1 x 1.2m,  1 x 1.4m,  6 x 1.5m,  .                                                               Enquire today with your requirements Read more >>

$200 + GST / Each

Steel Wraps - Spade Buckets

  Sizes are: 1 x 200mm 1 x 250mm 3 x 300mm 9 x 350mm 3 x 500mm 1 x 600mm Enquire now with your requirements Read more >>

POA

Hydraulic Rams

  10 Rams for quick hitches.  Read more >>

$1,500 + GST

6T Quick Hitch

  This is a new JB quick hitch that fits an EX60 or ZX60.  Check dimensions below to see if it will fit your excavator.  Get in first as this won't last long. *Pin Centres* 250mm ... Read more >>

$500 + GST

2t - Digging Bucket

  This small digging bucket would be suitable for a 2 -2.5 tonne excavator.  It has ears ready to be fitted to your requirements.  This bucket measures 330mm wide and will need a tidy up to be saleable.  It has two teeth and side cutters. ... Read more >>

$150 + GST

300mm spade insert

    This spade insert measures 300mm wide and could be adapted to fit any spade frame. The bolt hole centres are 125mm at the bottom of the spade.    The bolts are included.  The holes at the top of the spade are 15mm square and... Read more >>

$1,300 + GST

TILT BUCKET FOR 3 TONNE

  These buckets are incomplete so are ready to be made to your requirements.  They need the two rams fitted and the ears and bosses fitted.  The bucket measures 1.2m wide.  Enquire today with your dimensions. Read more >>

$595 + GST

400mm Spade bucket

    This spade bucket appears unused.  It measures 400mm wide and has welded pins.   This bucket is most likely for a 1.5 tonne Komatsu.  Please see dimensions below.     Pin Centres:             125mm Dipper Width:         120mm Pin Diameter:          30mm Colour:                      Grey.   Price:                         $595 + GST   Read more >>

$1,000 + GST

12t - HYD Hitches

  2 of these hitches available - These are new JB hydraulic hitch needs a bit of a tidy up.  These hitches need hydraulic rams fitted. They would be suitable for a 12 tonne excavator.  Please check dimensions below to see if it will fit your... Read more >>